The imitation copper door, as the name suggests, is not a copper door, but it belongs to a series of products of the copper door. It is a counterfeit effect of the copper door.

The imitation copper door is made of electrolytic plate, and the surface is sprayed with paint similar to the copper door to make it look similar to the copper door, so it is called the imitation copper door.

The construction steps are: first, remove rust, then apply anti-rust paint, and then fully brush the brass gold powder paint. After drying, use the tip of an old short-haired brown brush to dip a little black matte paint on the door. Brush, can not brush into a black, can not be too regular. This method is an imitation of copper for embossed doors, and any of these paints can be used. The imitation copper door is generally named after the effect similar to the copper door on the surface, and this kind of door is as beautiful and durable as the copper door in performance and appearance. It has good anti-theft performance, and is beautiful and luxurious, and its use of paint is actually a trick. At present, the copper materials for making imitation copper doors on the market include imitation brass and red copper. Take the iron door as an example of anti-brass,

Most of the domestic anti-theft doors use the pickling and phosphating process before painting. Due to the complex structure of the anti-theft doors, most of them are directly welded by hot-rolled pipes, hot-rolled plates, forgings and cold plates. Spraying poses certain difficulties. Therefore, degreasing and rust removal in the early stage is also a key step in the imitation copper process. If this step is not handled properly, the powder and paint will still fall off after a few years, which will affect the appearance of the imitation copper door.

So how to use and maintain the copper door? As we all know, copper doors are high-end products in the category, and the price is not cheap, so they also need careful care when using them.

1. Usually, when using the copper door, it should be opened and closed slowly to avoid it colliding with other things and causing the protective layer of the copper door to be damaged.

Second, in the usual maintenance, you can use a dry towel to clean it. Note: Do not use detergents that contain chemicals that destroy paint protection.

In daily maintenance, it is generally necessary to prevent the damage of oxides and microorganisms to the copper door. Because the air contains a lot of dust and acid gas, it will corrode copper in a humid environment. Therefore, we usually clean and dry it. You can wax the copper door, which can not only isolate the air, but also prevent the green patina from affecting the overall appearance.